s6e2d3 series cypress semiconductor corporation 198 champion court san jose, ca 95134 408.943.2600 march 2, 2016 document no. 002 - 05036 rev. *a 1 september 16, 2015 datasheet errata for the s6e2d3 series 32 - bit arm ? cortex ? - m4f, fm4 microcontroller this document describes the errata for the s6e2d3 series 32 - bit arm ? cortex ? - m4f, fm4 microcontroller . compare this document to the devices data sheet for a complete functional description. contact your local cypress sales representative if you have questions. part numbers affected part number s6e2d3 series page item description original document code: ds709 - 00023 - 1v0 - e rev. 1.0 june 25, 20 15 64 9. handling devices "sub crystal oscillator" should be added as indicated by shading below. surface mount type lead type
errata document s6e2d3 series march 2, 2016 document no. 002 - 05036 rev. *a 2 page item description 92 14.3.1 current rating table 14 - 10 should be added as indicated by the shading below. table 14 - 10 typical and maximum current consumption in deep standby stop mode, deep standby rtc mode and vbat parameter symbo l pin name conditions frequency (mhz) value unit remarks typ max power supply current iccvbat vbat rtc stop - 0.009 0.032 a *3, *4, *5 t a =+25c - 0.994 a *3, *4, *5 t a =+85c - 1.491 a *3, *4, *5 t a =+105c rtc *6 operation 1.0 1.636 a *3, *4 t a =+25c - 2.828 a *3, *4 t a =+85c - 4.242 a *3, *4 t a =+105c rtc *7 operation 0.7 1.153 a *3, * 4 t a =+25c - 2.277 a *3, *4 t a =+85c - 3.416 a *3, *4 t a =+105c *1: v cc =3.3 v *2: v cc =3.6 v *3: when all ports are fixed. *4: when lvd is off *5: when sub oscillation is off *6: when using the crystal oscillator of 32 khz (including the curr ent consumption of the oscillation circuit) when the standard setting (ccs/ccb=11001110 ) *7: when using the crystal oscillator of 32 khz (including the current consumption of the oscillation circuit) when the low power setting (ccs/ccb=00000100)
errata document s6e2d3 series march 2, 2016 document no. 002 - 05036 rev. *a 3 page item description 176 15. ordering information ordering information should be corrected as indicated by the shading below. (error) part number package s6e2d35g0agv20000 plastic ? lqfp (0.5 mm pitch), 120 pin (fpt - 120p - m21) s6e2d35gjamv20000 s6e2d35j0agv20000 plastic ? lqfp (0.5 mm pitch), 176 pin (fpt - 176p - m07) s6e2d35g0agb30000 plastic ? pfbga (0.5 mm pitch), 161 pin (fdj161) s6e2d35g0agz20000 plastic ? ex - lqfp (0.5 mm pitch), 120 pin (lem120) (correct) part number package s6e2d35g0agv20000 plastic ? lqfp (0.5 mm pitch), 120 pin (fpt - 120p - m21) s6e2d35gjamv20000 s6e2d35j0agv20000 plastic ? lqfp (0.5 mm pitch), 176 pin (fpt - 176p - m07) s6e2d35g0agb30000 plastic ? pfbga (0.5 mm pitch), 161 pin (fdj161) s6e2d35g0ag e 20000 plastic ? ex - lqfp (0.5 mm pitch), 120 pin (lem120)
errata document s6e2d3 series march 2, 2016 document no. 002 - 05036 rev. *a 4 page item description 10 2. features note should be added as indicated by the shading below. (error) gdc unit ? controller for external graphics display ? accelerator for 2d block image tra nsfer (blit) operations ? embedded sram video memory ? high - speed quad spi (serial peripheral interface for external memory extensions) ? sdram interface for external memory extensions ? hbi (hyper bus interface) interface for external memory extensions ? maximum co re system clock frequency : 160 mhz (correct) gdc unit ? controller for external graphics display ? accelerator for 2d block image transfer (blit) operations ? embedded sram video memory ? high - speed quad spi (serial peripheral interface for external memory exten sions) ? sdram interface for external memory extensions ? hbi (hyper bus interface) interface for external memory extensions ? maximum core system clock frequency : 160 mhz note: ? user can leverage the internal vram and external hyperram as a graphics memory all owed to be written by gdc. 15 4. packages packages should be corrected as indicated by the shading below. (error) product name package s6e2d35g0a s6e2d35j0a s6e2d35gja lqfp: fpt - 120p - m21 (0.5 mm pitch) ? - ? lqfp: fpt - 176p - m07 (0.5 mm pitch) - ? - pfbga: fdj161 (0.5 mm pitch) ? - - ex_lqfp(teqfp): lem120 (0.5 mm pitch) ? ? product name package s6e2d35g0a s6e2d35j0a s6e2d35gja lqfp: fpt - 120p - m21 (0.5 mm pitch) ? - ? lqfp: fpt - 176p - m07 (0.5 mm pitch) - ? - fbga : fdj161 (0.5 mm pitch) ? - - ex_lqfp(teqfp): lem120 (0.5 mm pitch) ? - - ? ?
errata document s6e2d3 series march 2, 2016 document no. 002 - 05036 rev. *a 5 page item description 16, 18 5. pin assignment signal name should be corrected as below. (error) ge_spcsx_0 (correct) g e_spcsx 0 (error) ge_hbcsx_0 (correct) ge_hbcsx 0 (error) ge_hbcsx_1 (correct) ge_hbcsx 1 21, 23, 48 6. pin descriptions signal name should be corrected as below. (error) ge_spcsx_0 (correct) ge_spcsx 0 (error) ge_hbcsx_0 (correct) ge_hbcsx 0 (er ror) ge_hbcsx_1 (correct) ge_hbcsx 1 67 10. block diagram signal name should be corrected as below. (error) ge_spcsx_0 (correct) ge_spcsx 0 (error) ge_hbcsx_0/1 (correct) ge_hbcsx 0/1 93 14.3 dc characteristics vflash memory standby current sh ould be corrected as indicated by the shading below. (error) parameter symbol pin name conditions value unit remarks min typ max vflash memory standby current i ccvflash vcc at standby - 15 25 a vflash memory read current at read - 9 14 ma 4 0mhz 13 20 80mhz vflash memory write/erase current at write/erase - 20 25 ma (correct) parameter symbol pin name conditions value unit remarks min typ max vflash memory standby current i ccvflash vcc at standby - 15 35 a vflash memor y read current at read - 9 14 ma 40mhz 13 20 80mhz vflash memory write/erase current at write/erase - 20 25 ma 162, 161, 162 14.4 ac characteristics signal name should be corrected as below. (error) ge_spcsx_0 (correct) ge_spcsx 0 (error ) ge_hbcsx_0 (correct) ge_hbcsx 0 (error) ge_hbcsx_1 (correct) ge_hbcsx 1
errata document s6e2d3 series march 2, 2016 document no. 002 - 05036 rev. *a 6 document history page document title: datasheet errata for the s6e2d3 series 32 - bit arm ? cortex ? - m4f, fm4 microcontroller document number: 002 - 05036 rev. ecn no. orig. of change description of change ** C akih initial release . *a 5158612 akih migrated spansion errata sheet from s6e2d3_ds709 - 00023 - 1v0 - e - de2 to cypress format cypress semiconducto r 198 champion court san jose, ca 95134 - 1709 phone: 408 - 943 - 2600 fax: 408 - 943 - 4730 http://www.cypress.com ? cypres s semiconductor corporation 2015 - 2016. this document is the property of cypress semiconductor corpor ation and its subsidiaries, including spansion llc ("cypress"). this document, including any software or firmware included or referenced in this document ("software"), is owned by cypress under the intellectual property laws and treaties of the united stat es and other countries worldwide. cypress reserves all rights under such laws and treaties and does not, except as specifically stated in this paragraph, grant any license under its patents, copyrights, trademarks, or other intellectual property rights. if the software is not accompanied by a license agreement and you do not otherwise have a written agreement with cypress governing the use of the software, then cypress hereby grants you under its copyright rights in the software, a personal, non - exclusive, nontransferable license (without the right to sublicense) (a) for software provided in source code form, to modify and reproduce the software solely for use with cypress h ardware products, only internally within your organization, and (b) to distribute the software in binary code form externally to end users (either directly or indirectly through resellers and distributors), sole ly for use on cypress hardware product units. cypress also grants you a personal, non - exclusive, nontransferable, license (without the right to sublicense) under those claims of cypress's patents that are infringed by the software (as provided by cypress, unmodified) to make, use, distribute, and import the software solely to the minimum extent that is necessary for you to exercise your rights under the copyright license granted in the previous sentence. any other use, reproduction, modificatio n, translation, or compilation of the software is prohibited. cypress makes no warranty of any kind, express or implied, with regard to this document or any software, including, but not l imited to, the implied warranties of merchantability and fitness for a particular purpose. cypress reserves the right to make changes to this document without further notice. cypress does not assume any liability arising out of the application or use of any product or circuit described in this docum ent. any information prov ided in this document, including any sample design information or programming code, is provided only for reference purposes. it is the responsibility of the user of this document to properly design, program, and test the functionality and safety of any app lication made of this information and any resulting product. cypress products are not designed, intended, or authorized for u se as critical components in systems designed or intended for the operation of weapons, weapons systems, nuclear installations, lif e - support devices or systems, other medical devices or systems (including resuscitation equipment and surgical implants), pollution control or hazardous substances management, or other uses where the failure of the device or system could cause personal inj ury, death, or property damage ("unintended uses"). a critical component is any component of a device or system whose failure to p erform can be reasonably expected to cause the failure of the device or system, or to affect its safety or effectiveness. cypr ess is not liable, in whole or in part, and company shall and hereby does release cypress from any claim, damage, or other liability arising from or related to all unintended uses of cypress products. company shall indemnify and hold cypress harmle ss from and against all claims, costs, damages, and other liabilities, including claims for personal injury or death, arising from or related to any unintended uses of cypress product s. cypress, the cypress logo, spansion, the spansion logo, and combinations there of, psoc, capsense, ez - usb, f - ram, and traveo are trademarks or registered trademarks of cypress in the united states and other countries. for a more complete list of cypress trademarks, visit cypress.com. other names and bra nds may be claimed as property of their respective owners.
|
